FOXY 280 7.2V brushed motor

Brushed electric motor size "280" with nominal voltage 7.2V. Operating voltage 3.7–8.4V, 15000 RPM at nominal voltage. Diameter 20mm, housing length 25mm, shaft diameter 2mm, weight 22g.

Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a  gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.

Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling.  High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.

FOXY 250 7.2 V is a brushed electric motor size "250" with a shaft with a diameter 2.0mm and plain bearings. It is suitable for powering indoor aircraft models or park flyers with direct drive (4.7x2.3" or 4x3" propeller) or with a gearbox for a small car and boat models.

For controlling the RPM, you will need an ESC with a load capacity of 8–12A.

FOXY 280 7.2V is a suitable replacement for a motor SPEED 280 7.2V (product number 7301).